In the garment industry, the cutting machine is an esse […]
In the garment industry, the cutting machine is an essential cutting tool for cutting all kinds of fabrics and leather. Under the current development of science and technology, the cutting machine has undergone obvious changes. The traditional CNC manual operation has gradually transitioned to fully intelligent automatic cutting, and the efficiency has been greatly improved. But for some small and medium-sized enterprises, the cost of fully automated cutting machines is too high, which means that they are overkill. Therefore, the CNC cutting machine will be the favorite of small and medium-sized clothing and shoemaking and other related industries.
CNC cutting equipment is a relatively precise CNC product. The daily maintenance of the cutting machine plays a very important role in maximizing the efficacy of the cutting machine and effectively improving the cutting accuracy and efficiency. Below are the senior after-sales service engineers of Sanma clothing equipment to provide 2 opinions.
First, how to maintain the cutting knife used for cutting, how to ensure that the cutting knife is always in good working condition, and ensure the accuracy of cutting: the cutting knife is an accessory often used in cutting operations, and it is also an important part related to cutting accuracy. One, therefore, the cutter requires careful daily maintenance. In daily maintenance, carefully check the width of the cutter. First, remove the puncher, remove the cutter, and then use the vernier caliper to check the upper, middle and lower values of the cutter width, and take the average value as the current cutter To ensure the accuracy of cutting, once the value of the width of the cutter does not meet the standard, the cutter should be replaced in time.
Second, how to prevent the slider from malfunctioning during high-speed motion: the slider moves at high speed with the cutter during the cutting operation, which directly affects the cutting accuracy and cutting effect of the cutter. If the slider fails during the operation, It will affect the accuracy of the entire cutting operation. Therefore, before the daily cutting operation, carefully wipe off the residual grease around the slider, and re-coat the high temperature resistant lubricating oil around the slider, so as to avoid the slider at high speed. Failure during movement will affect the life of the slider and the cutting accuracy of the cutter. If the slider is obviously shaken after it is installed, it needs to be replaced in time.