新闻中心

Analysis of the Causes of Embroidery in Computer Embroidery Machine

                       
Update:2019.07.2019-07-13T14:33:26+00:00
Summary:

When we use the computer embroidery machine to embroide […]

When we use the computer embroidery machine to embroider, there is a problem of embroidering and positioning. What is the reason for this? The following is a detailed analysis of the reasons why the computer embroidery machine moves when embroidering.
First, because the paper under the cloth is too thin, it does not lining up the fabric.
Second, in the process of computer embroidery, the bottom line is too close to the edge of the object.
Third, due to the fluff of the fabric surface caused by the position of the cloth, it is more obvious when patching on the flannel.
Fourth, computer embroidery should be played as far as possible from the center to the periphery, so that it is more stable in the production process.
Fifth, the computer embroidery machine pulls up the {cloth} paper strength just right, don't be too strong, otherwise it will be easy to change.
Sixth, due to the deterioration of the machine aging precision caused by the position, such as: the same batch of embroidered, some normal, some walk.

www.cnjinlong.net

0
Views: 767